The AN206 controller module has been developed for use in plant engineering
Combination with other modular units permits assembly of any controller arrangements required
The P, I and D components can be adjusted internally or externally, via potentiometers
External parameter adjustment is used predominantly in test and inspection system engineering.
The P, I and D components can be adjusted internally or externally, via potentiometers
External parameter adjustment is used predominantly in test and inspection system engineering

Type		PID controller
Use		In plant engineering
Connector		32 pole male connector strip as per DIN 41612 D32
Supply voltage		±15V DC
Output current		I max. 800 mA, 1600 mA, 2500 mA, depending on card type with current limitation
Short-circuit protection		For the magnet and the reference voltage
Input stage		Input resistors wired 10k½/V c6/c12: fixed inputs (R100, R101) a30/a32: adjustable inputs (R102, R103)
Controller		R105, R106, R111
Control inputs		K1 Pin a4 Controller enable K2 Pin c4 Enable I component K3 Pin c2 Enable pilot control K4 Pin c10 Input link for pilot control
Measuring sockets		M1: Difference generator output ±10V M2: Controller output ±10V
For mer informasjon		Klikk her --- Datablad