- The AN430 controller module has been developed, with the controller and servo amplifier accommodated in a single housing, for actuation of servo valves
- The servo valve section can be supplied for four different current ranges (±20mA, ±100mA, <br>±200mA, ± 300mA). Special types for other valve currents are also possible
- Interchangeable input modules are available for target value and actual value signals, making possible trouble free matching of the signals by the customer
- The target value is routed via an adjustable ramp with a quadrant detector
- This ramp can be deactivated
- The I component of the controller can also be deactivated, permitting operation as a P or a PD controller
- The target value can be adjusted via a spindle resistor relative to the actual value
- Since the valve coil is operated on one side toward 0V, the control module’s end stage can also be used as a current driver or U/I converter
- Snap on housing permits its installation on the standard mounting rails found in control cabinets
- Electrical connection is accomplished via the built in terminal strip
|
|
 |