| Type |
|
Automotive Test Controller |
|
|
| Channels |
|
1-32 |
|
|
| Frequency range |
|
0,01-500 Hz |
|
|
| Housing |
|
19" cabinet 1,8 m high
Integrated 17" full VGA color display
Ventilated controlcabinet |
|
|
| Servo controller |
|
Up to 2,5 kHz multi channel or up to 10 kHz single channel control loop
Unique MOOG control loop
Three feedback control possibilities (Force, Position, Acceleration)
Bumpless instant mode switching between force and position mode |
|
|
| Function generation |
|
Multi-channel function generation with user defined "mixer" funtions
Waveforms: Sine, sawtooth, block/square, ramp, rounded ramp, exponential
Analog input can be used as command
Complex simulation spectrum support including power spectral density
Constant amplitude and phase matching |
|
| Standard inputs (per channel) |
|
2x high resolution (0,03%) with selectable gain and bridge excitation
Pot meter input (0,03 %) (± 5 V 5 mA) or LVDT input (0,03 %) with LVDT excitation 3,35 V RMS @ 3,5 kHz)
Encoder, absolute (SSI) maximum 32 bit or relative 10 bit
16 bit input (± 10V) |
|
| Standard outputs (per channel) |
|
16 bits ± 100 mA valve driver output, with a limit in software from 0 to 100 % or (hardware selectable) ± 10 V output
2x 16 bit D/A converters, ± 10 V |
|
| Optional items |
|
Manifold control unit with 4 On/Off
Low/High pressure valves (24 VDC/2 A each)
Digital I/O board containing 8 inputs and 8 outputs
Analog I/O board containing 8 inputs and 8 outputs
Analog I/O board containing 16 inputs
Strain amplifier board (6 channels, 1/4, 1/2 and full bridge 120/350 ohm)
Accelerometer input board 6 channels
TestSDK for connection to MATLAB, LabVIEW, and other programming environments
Uninterruptible power supply (UPS) |
|
| Typical applications |
|
4-Posters Test Systems
6-Degree of Freedom (DOF) Test Rig
Durability and fatigue testing
Shock and performance evaluation
Elastomeric testing
Multi-axis test rigs |
|
| For mer informasjon |
|
Klikk her --- Datablad --- Katalog |
|