The AN208 setpoint module was designed for the application of setpoints in electrohydraulic open and closed loop control systems
5 setpoint relays
Setpoints adjustable using multi-turn resistors
Solder jumpers on the card to select internal or external setpoints
Summation amplifier with 6 inputs to cascade several setpoint modules
Output signal from the summator is available both inverted and non-inverted
Operating condition of each setpoint relay is displayed on the front plate above the multiturn resistance
As a special feature for proportional valves, the polarity can be changed by solder bridge
Additional supply rectifier to provide 24V DC for the relay coils

Type		Setpoint module
Use		Application of setpoints in electrohydraulic open and closed loop control systems
Connector		32 pin connector DIN41612 D32
Supply voltage		±15V DC
Setpoint relays		5 pcs., 24V, approx. 30mA incl. LED indicator
Inputs		6 setpoint inputs ±10V
Outputs		5 outputs to feed external setpoint potentiometers 1 summation amplifier output ±10V, inverted and non-inverted
Multi-turn resistors		5 multi-turn resistors for setting internal setpoints or for setting the reference voltage for external setpoint potentiometers
For mer informasjon		Klikk her --- Datablad