Suitable for a working pressure up to 10 bar
Pressure peaks will be absorbed by a sufficient margin of safety
Directly mounted to the reservoir and connected to the return-line
Filter elements as fine as 5 μm(c) microns are available; finer filter elements on request
Can be used for petroleum-based fluids, HW emulsions, water glycols, most synthetic fluids and lubrication fluids
Stable elements
Excellent filtration capabilities
High dirt retaining capacity
Long service life
Easy to service.

Type		Returfilter
Temperature range		-10°C to +80°C (for a short time +100°C)
Operating medium		Mineral oil, other media on request
Max. operating pressure		10 bar
Opening pressure by-pass valve		2,0 bar
Connection system		Thread connection according to DIN 3852, T2
Output		Hose nozzle or thread connection
Housing material standard		Filter head AL, filter cover / filter bowl glass fibre reinforced polyamide
Housing material IS11, category M2		Filter head GG, filter cover steel, filter bowl carbon fibre reinforced polyamide
Housing material IS11, category 2:		Filter head AL, filter cover / filter bowl carbon fibre reinforced polyamide
Sealing material		Nitrile (NBR) or Viton (FPM), other materials on request
Installation position		Vertical
Volume tank		0,3...1,7 l
Classification		Pressure Equipment Directive 97/23/EC for mineral oil (fluid group 2), Article 3, Para. 3 ATEX Directive 94/9/EC according to specific application
For mer informasjon		Datablad --- Oversikt --- Brosjyre

		Internormen RF 210-320 Returfilter				Internormen TEF 41 Returfilter

		Internormen TEF 426 Returfilter				Internormen TEF 625 Returfilter

		Internormen TEF 952 Returfilter				Internormen TRW 310 Returfilter, horisontal montering

						Oversikt Internormen returfilter - Standard