Detecting metal particles in moving hydraulic and lubricant fluids
Typical application areas:
- inexpensive, continuous monitoring of large-scale gearboxes for incipient heavy wear with the increasing number of particles per time unit
- monitoring component cleanliness e.g. on flushing test stands

Type		Metallpartikkel sensor
Detection limit		> 260 μm Fe
Max. detection rate		100 particles/s
Operating pressure		≤ 20 bar
Fluid temperature range		-30°C…+85°C
Flow rate		30...110 l / min
Power supply		+ 24 V DC
Electrical power consumption		max. 5 W
Outputs		1x signal (24 V Pulse ~ 7ms) 1 x diagnostic output (24 V, if no malfunctions)
Max. load on electric output		10 mA
Connection size		SAE Flansch 1”
For mer informasjon		Klikk her --- Brosjyre

Internormen MPS 01.2 Metallpartikkel sensor

Internormen MPS 03.1 Metallpartikkel sensor

Internormen WSPS 05 Sensor for vannforurensing

Oversikt Internormen sensorer