| Type |
|
Filterelementer |
|
|
| Interpor Fleece (VG) Glass Fiber |
|
- Deep filtration
- High particle holding capacity
- Best micron rating at high Δp
- Usable for mineral oils, emulsions, and for most synthetic
hydraulic fluids and lubrication oils
- Filter fineness based on filtration quotient ßx(c) ≥ 200: 4 μm(c), 5 μm(c),
7 μm(c), 10 μm(c), 15 μm(c), and 20 μm(c) |
|
|
| |
|
|
|
|
| Paper Matting (P) |
|
- Deep filtration
- Constructed of paper and polyester fiber
- High material stability and strength
- Available in 10 μm and 25 μm fineness |
|
|
| |
|
|
|
|
| Stainless Steel Mesh (G) |
|
- Surface filtration
- Provides high resistance filter elements (irrespective of the hydraulic
fluid used)
- Partially cleanable
- Available in 25 μm, 40 μm, and 80 μm finenesses (other micron ratings
on request) |
|
|
| |
|
|
|
|
| ISO6 |
|
Adhesive: Standard
By-pass Valve: Plastic, Stainless Steel-spring 301
Seal: P, V (nitrile, viton)
Filtration Material: VG, G, M (no P)
Plait: Stainless Steel-support wire
Metal Parts: Aluminium Anodized, Steel Tinned |
|
| |
|
|
|
| ISO7 |
|
For filter elements used with Oil/Ammonia-mixtures (NH3) Permanent working temperature ≤ +176°F
Adhesive: Article No. 325315
Sealing gaskets: N (Neoprene, CR)
Filtration material: VG, G, M |
|
| |
|
|
|
| ISO8 |
|
For filter elements working at high temperatures ≤ 284°F
Adhesive: Article No. 337085
Sealing gaskets: V (Viton (FPM))
Filtration Material: VG, G, M, P
Bellow: Standard
Metal Parts: Standard |
|
| |
|
|
|
| ISO9 |
|
IS09 for filter elements used with Oil/Ammonia-mixtures (NH3)
Permanent working temperature 194°F / Maximum temperature 212°F
Adhesive: Article No. 325315
Sealing Gaskets: Neoprene (CR); WS 13.097; HNBR; WS 20.357
Filtration Material: VG, G
Bellow: Support fleece PS 315 (see configuration specification below)
Metal parts: Steel, zinced |
|
| |
|
|
|
| For mer informasjon |
|
Oversikt |
|